Step by step guide to Nail Dipping Application

Step by step guide to Nail Dipping powder



Step 1

Prep all 10 nails - push back cuticles and remove shine using a block buff. Clean with alcohol on lint free wipe.

Step 2

OptionalBefor your colour application apply 1 coat of Base to 3/4 of the nail only. Dip into clear powder. This initial coat will provide extra strength for longer nails. Repeat on all 10 nails.

Step 3

Apply 1 coat of Base over entire nail, avoid touching the cuticle or skin.

Dip into colour powder

Brush dust away.

Repeat on all 10 nails

Step 4

Apply a second coat of Base and dip into colour again.

Repeat on all 10 nails.

Step 5

Apply another coat of Base. Dip into powder. (Colour or clear)

You can use Clear powder for your final coat to protect the colour from filing and add extra strength.

Step 5

Brush Activator over entire nail

Wait until product is dry enough to file (approx. 1 min)

Step 6

Shape nails, file surface gently to smooth out any bumps.

Step 8

Block buff to smooth out the nail surface.

Step 9

Wash hands/remove dust.


Step 10

Ensure nails are completely dry. Any moisture left on the nails will ruin your Activator and Topcoat

Apply Activator to all 10 nails.

Step 11

WAIT a few seconds for the Activator to evaporate.

Again there must be no moisture remaining - this may cause your topcoat brush to harden.

Apply 2 thin coats of SHINE

Wait 1-3 minutes for nails to dry.

*If nails are still sticky apply Activator again to dry the top shine.





Contact me via email or Facebook ☺




Leave a Reply

Your email address will not be published. Required fields are marked *